Plywood (APA MDO PLYFORM CLASS 2)

Concrete Form Grade Specifications

 

Durability: Exterior -equivalent to (BS) EN 314 Bond Class 3
Veneer: Face B or better, Inner C or C plugged; Back B or better
Span rating/support spacing and designated loading: Span rating not applicable
Thickness: 15.1mm(19/32) / 15.9mm(5/8) / 17.5mm(11/16) / 18.3mm(23/32) / 19.1mm(3/4)
General Info: MDO Plyform is purpose-made for formwork. Not the same as Regular MDO or MDO General, which is unsuitable for formwork. Smooth, opaque resin-fibre overlay heat-bonded to one(typical) or bo+B11th panel faces. Smooth, solid faces
Additional Info: Releasing agent normally factory applied with light re-application recommended between pours. Edge-sealant applied by mill

 

Bookmark the permalink.

Comments are closed.