Panel Veneers (Face B or better, Inner C, Back C or better): Thickness Options
| Durability: | Exterior grade (equivalent to (BS) EN 314 Bond Class 3) |
| Veneer/strength grading: |
Face B or better, Inner C, Back C or better Structural 1 indicates the panel is made from the strongest wood species (Group 1) throughout. It should support the highest loads along and across the panel |
| Re=use: | 5 to 10 pours |
| Thickness/US Performance Category*: | 15.1mm(19/32*) / 15.9mm(5/8) / 17.5mm(11/16) / 18.3mm(23/32) / 19.1mm(3/4) |
| General Info: | MDO Plyform provides a smooth, solid face, created by means of a smooth, opaque resin-fibre overlay heat-bonded to one (typical) or both panel faces. Made specifically for formwork, creating a matt or flat finish on the concrete surface. Not the same as Regular MDO or MDO General, which are unsuitable for formwork |
| Additional Info: | Releasing agent added by mill, with edge sealer usually applied on site |