Plywood (RATED SHEATHING STRUCTURAL 1)

What defines a product under UK and EU construction product regulations?

This applies to ‘any product or kit which is produced and placed on the market for incorporation in a permanent manner in construction works or parts thereof and the performance of which has an effect on the performance of the construction works with respect to the basic requirements for construction works.’

Products must clearly display the appropriate conformity marking and have the correct Declaration of Performance documentation in line with either the UK-CPR or the EU-CPR. More

Tell me more about a Declaration of Performance

Manufacturers wishing to trade in the European market are legally required to set down the levels of performance for any construction product. They have to be listed in an official document called a Declaration of Performance. More.

The mark of approval stamped on a panel means it can legally be used – but which standards apply?

You can either check out the right standard for your application; or look at the standards that the trademarked panels comply with for different plywood grades – A-A, A-B, A-C; B-B, B-C; C-C, C-D – here.

What is the difference between a touch-sanded panel and sanded panel?

The veneer of an APA trademarked panel must conform to one of the six grades listed in the US PS 1-19 standard: N, the highest classification (rarely produced), followed by A, B, C-plugged, C and D. Non-overlaid APA plywood panels come in three levels of surface finish – sanded, touch-sanded and unsanded. More.

Also see veneer grades for Popular APA Plywood Panels.

How do APA veneer grades match those in UK and EU standards

The main grades for APA’s structural plywood panels are: A-A, A-B, A-C, B-B, B-C;,C-C, C-D, D-D, Sturd-I-Floor, Underlayment, CC plugged, CD plugged. APA has a quick guide here to help you match the grades with the requirements of (BS) EN 635-3. Equivalents cannot be exactly compared as two different sets of grading rules apply.

I want to specify an APA panel for concrete formwork – what do I need to know?

Plyform is a type of panel with sufficient strength to support the weight of the wet concrete. APA offers three types, all using only the strongest wood species (groups 1,2 or 3) for the face and back veneers. They have an exterior bond classification and come in three strength classes – Structural 1, Class I or Class II.

See APA’s comprehensive Concrete Forming Design/Construction Guide for architects, engineers and contractors and the types of APA concrete forming plywood panels.

What plywood panels likely to be available in the UK & EU?

The main grades for APA’s structural plywood panels are: A-A, A-B, A-C, B-B, B-C;,C-C, C-D, D-D, Sturd-I-Floor, Underlayment, CC plugged, CD plugged. Non-overlaid APA plywood panels come in three levels of surface finish – sanded, touch-sanded and unsanded. APA’s guide identifies each panel’s specific finish, veneer strengths and the wood species used, as well as bond durability.

What are the main European standards that I would need to be aware of for plywood panels?

The main standards are: EN 13986, EN 636, EN 314, EN 635-3. And for more details, see EU standards for plywood.

The CE-mark on an APA plywood panel means it conforms to European Standards – but which ones?

Plywood Design Information looks at the plywood grades A-A, A-B, A-C; B-B, B-C; C-C, C-D and the relevant standards that the trademarked panels comply with.

How do APA veneer grades match those given in the European standards

APA has produced two easy to follow guides to help match the grade numbers given on a US finished plywood panel with the requirements of EN 635-3.

Detailed guide listing permissible defects – with maximum sizes.

Simplified guide to the US PS 1-19 veneer grading rules and appearance grades in EN 635-3 based on the appearance of the surface veneers. Equivalents cannot be exactly compared as two different sets of grading rules apply.

I want to specify an APA panel for concrete formwork – what do I need to know?

See APA’s comprehensive Concrete Forming Design/Construction Guide for architects, engineers and contractors and the types of APA concrete forming plywood panels.

What are the main plywood panels likely to be available in Europe?

See APA’s guide to ‘Plywood Panel Grades for Specific Applications’

What are the main standards for plywood panels?

The main standards are: (BS) EN 13986, (BS) EN 636, (BS) EN 314, (BS) EN 635-3. And see ‘Applications, Check your Standard‘.

What are the main changes to the FSC Chain of Custody Certification standard?

Download What’s New in FSC revised COC standard. Also, the previous FSC compulsory verification programme has been replaced by a due diligence protocol with a new risk assessment system. Learn more. Good forestation practice in the US supports the aims of EUTR. Its sustainably managed forests comply with one or more of the five leading certification agencies responsible for verifying proper forestry practices.

Can US certified EPDs be used for environmental performance ratings under the BREEAM system?

APA products can count towards a building’s BREEAM rating, learn how here. The British Research Establishment and the US Underwriters Laboratories now recognise each other’s certified EPD making it simpler for APA member mills to gain environmental performance ratings under the BRE Environmental Assessment Method (BREEAM).

Does APA plywood meet the lowest category (E1) for formaldehyde release without need for further testing?

Under the harmonised European Standard for wood-based panels, EN 13986, Annex B, ‘wood-based panels glued with resins emitting either no formaldehyde or negligible amounts of formaldehyde after production as e.g. isocyanate or phenolic glue’ are to be classified as E1 (the lowest formaldehyde release class) without further testing.

See APA’s guide Formaldehyde and Engineered Wood Products. APA plywood is designated under the lowest E1 category for formaldehyde release without needing further testing. APA’s US PS 1 and PS 2 plywood have been tested to EN 717-1 and formaldehyde levels already meet the requirements for the E1 classification limit.

Also see: Formaldehyde (plywood) and Formaldehyde (OSB).

Can APA plywood and OSB be used in non-construction applications?

US plywood and OSB are equally effective as sturdy, robust and cost-effective solutions for non-construction applications – from shelving, site hoardings , protective linings in the cargo bay of delivery vehicles to packaging and furniture. See APA’s Performance Panels. Need help to decide what grade or type of panel to use for a specific application? APA’s Industrial Panel Selection Guide (Form T200) is another easy to use resource.

What are Use Classes and how do they equate with Service Classes?

For maximum biological durability, both Service Classes and Use Classes must be considered when specifying engineered wood panels. See APA’ s guide here.

Use Classes covering plywood and OSB have replaced ‘hazard classes’. They will also cover LVL when the LVL standards have completed their update. Use Classes are based on different environmental exposures that can make the panel susceptible to deterioration. The in Eurocode 5 assign strength values and calculate deformation in load-bearing situations. They are determined by the moisture content of the panel corresponding to the environmental humidity and temperature during service.

How do APA’s member’s products count towards a sustainability assessment for new construction or in refurbishment projects?

The British Research Establishment and the US Underwriters Laboratories now recognize each other’s certified EPD making it simpler for APA member mills to gain environmental performance ratings under the BRE Environmental Assessment Method (BREEAM). This is the UK’s leading and most widely used environmental assessment method for buildings and communities. It sets the standard for best practice in sustainable design and has become the de facto measure used to describe a building’s environmental performance. Learn how APA products can count towards a building’s BREEAM rating.

What is a ‘life cycle stage’ and how do these link to the environmental assessment of whole buildings?

A good starting point is our Green Topics section and Types of EPD and the five life cycle stages

How do core category rules link with environmental product declarations?

EN 15804:2012 +A1:2013 provides the core Product Category Rules (PCR) for the production of Environmental Product Declarations (EPD) for all construction products and services. Review with main environmental standards. For more details see: Core Product Category Rules (PCR) for Products and Services.

Whose responsibility is it to check that wood products being imported into the EU do not originate from illegally sourced timber supplies?

The European Union Timber Regulation (EUTR) puts specific obligations on operators and traders . Operators (or importers) are any (natural or legal) person first placing timber on the EU market. They must maintain records of any traders that they supply timber to. They must implement a due diligence system to minimise the risk of putting illegal timber or any of its derived products on the market. Learn more.

Does the EUTR require mills to provide any extra documentation for customs entry into the European Union?

The European Union Timber Regulation (EUTR) puts specific obligations on operators and traders and applies to timber originating in the domestic (EU) market, as well as from third (non-EU) countries such as the US. The information it requires has to be retained for at least five years and be available on request. See European Timber Regulation.

Must all plywood and OSB panels carry a CE marking?

Manufacturers of wood-based products covered by either a harmonised European standard (hEN) or a European Technical Assessment (ETA) must apply for CE marking under the 2013 Construction Products Regulation. See CPR & CE Marking and our Official Guidelines section.

What is the definition of a construction product under the CPR?

This applies to ‘any product or kit which is produced and placed on the market for incorporation in a permanent manner in construction works or parts thereof and the performance of which has an effect on the performance of the construction works with respect to the basic requirements for construction works.’

Products must clearly display the CE mark and have the correct Declaration of Performance documentation. For more info: CPR & CE Marking.

What is a Declaration of Performance referred to under the Construction Products Regulation?

Under the CPR, manufacturers wishing to trade in the European market are legally required to set down the levels of performance for any construction product. They have to be listed in an official document called a Declaration of Performance.

What is the difference between Structural 1 and Exposure 1?

Exposure 1 is a glue bond classification. It uses the same 100% waterproof glue as exterior panels and refers to a panel’s durability when long delays in construction are expected or when facing high moisture content. For plywood, see https://apawood-europe.org/products-trademarks/plywood/trademarks/glue-bond/. For OSB: https://apawood-europe.org/products-trademarks/osb/trademarks/exposure-durability-classification/

Structural 1 refers to a panel’s superior performance characteristics. For OSB, see https://apawood-europe.org/products-trademarks/osb/comparable-performance-requirements/

For Structural 1 plywood, all panels have special improved veneer grades and if manufactured to the US PS1 standard, the veneer grades will be species with a Group 1 strength classification. See group classification of species.

The CE-mark on an APA plywood panel means it conforms to European Standards – but which ones?

Plywood Design Information looks at the plywood grades A-A, A-B, A-C; B-B, B-C; C-C, C-D and the relevant standards that the trademarked panels comply with.

I want to use a Rated Sheathing panel for flooring/ roofing application, what info do I need to know?

For plywood, see Span rating. For OSB, see Span rating. A full range of technical information in under Products and Trademarks.

What extra strength benefits do Structural 1 OSB panels provide over standard Rated Sheathing panels?

OSB Structural I on an APA trademark indicates that the OSB structural-panel meets the requirements of a Performance Rated panel. This delivers superior design capacity for these panels over OSB Rated Sheathing and Sturd-I-Floor. Also see Comparison of Superior Design Capacities for OSB Structural I Sheathing with OSB Rated Sheathing.

What is the difference between a touch-sanded panel and sanded panel?

Veneer in a finished US trademarked plywood panel must conform to one of the six grades listed in the US PS 1-09 standard: N, the highest classification (rarely produced), followed by A, B, C-plugged, C and D. Non-overlaid APA plywood panels come in three levels of surface finish – sanded, touch-sanded and unsanded.

Also see veneer grades for Popular APA Plywood Panels.

How do APA veneer grades match those given in the European standards

APA has produced two easy to follow guides to help match the grade numbers given on a US finished plywood panel with the requirements of EN 635-3.

Detailed guide listing permissible defects – with maximum sizes.

Simplified guide to the US PS 1-19 veneer grading rules and appearance grades in EN 635-3 based on the appearance of the surface veneers. Equivalents cannot be exactly compared as two different sets of grading rules apply.

How do I correctly gauge the face appearance a plywood Siding panel?

See guide to selecting siding (cladding) with APA 303 siding panels.

I want to specify an APA panel for concrete formwork – what do I need to know?

See APA’s comprehensive Concrete Forming Design/Construction Guide for architects, engineers and contractors and the types of APA concrete forming plywood panels.

Are APA panels tongue and grooved on all four edges?

APA panels have a tongue and groove profile on their two long edges. This eliminates the need for support (blocking) under adjacent panel edges to prevent them from deflecting independently of each other when load is applied. See Tongue & Groove (plywood) and Tongue & Groove (OSB).

I am not familiar with the term ‘Sized for Spacing’ – what is its significance?

‘Sized for Spacing’ on APA Rated Sheathing, APA Rated Sturd-I-Floor and APA Rated Siding trademarks indicates that the manufacturer has produced the panel to a size slightly less than the traditional nominal 2440mm (96″) by 1220mm (48″). It is done to facilitate proper panel spacing during construction. See Sized for Spacing (plywood) and Sized for Spacing (OSB). For further technical details see Product and Trademarks.

How are Performance Category and thickness related?

Performance Category, Panel Thickness and Span Ratings are key categories that need to be considered together. See Thickness, Performance Category (plywood) and Thickness, Performance Category (OSB).

I’d like to know more about a panel’s Span Rating and how it links to thickness.

Plywood: Span rating
OSB: Span rating

What is Span Rating on the APA trademark and why is it important?

Span Rating denotes the maximum recommended centre to centre spacing of supports in inches over which the panel should be placed with its strength axis across two or more supports. Plywood: Span rating. OSB: Span rating

What is the difference between Exposure 1 and Exterior plywood panels? What are their appropriate uses?

Bond classification relates to moisture resistance of the glue bond and therefore to the structural integrity of the panel. See glue bond durability classification (plywood) and exposure durability (OSB).

What are the main OSB panels likely to be available in Europe?

See APA’s guide to panel grades and also info on understanding the trademark.

What are the main plywood panels likely to be available in Europe?

See APA’s guide to ‘Plywood Panel Grades for Specific Applications’

What are the main European standards that I would need to be aware of for OSB panels?

The main standards are: EN 13986 and EN 300. But also see the other relevant standards for OSB.

What are the main European standards that I would need to be aware of for plywood panels?

The main standards are: EN 13986, EN 636, EN 314, EN 635-3. And for more details, see EU standards for plywood.

Durability:	US panels are available in two classifications: Exterior – equivalent to (BS) EN 314 Bond Class 3 or Exposure 1 (always includes D veneer) – Bond Class 2
Veneer:	Mix of veneer grades used
Span rating/support spacing and designated loading:	Maximum support spacing is 812mm (32/16 on panel) with edge support for recommended allowable live load of 146 kg/m2 (30 lbs/sq.ft), without edge support 711mm (28″)
Thickness:	11.1mm (7/16)
Sanded/unsanded:	Unsanded only
General Info:	Unsanded grade for use where shear and cross-panel strength properties are most important

APPLICATIONS	General Description	Plywood Grade Rated (with span rating)	Non-Rated Plywood Grade	Bond Classification/Glue Line		Exterior veneer grades	Exposure 1 veneer grades	Span rating/support spacing and designated loading
NON-STRUCTURAL	Where appearance of both sides is important for interior applications, with smooth surfaces suitable for painting		A-A (NON-RATED)	US panels are available in two classifications: Exterior - equivalent to (BS) EN 314 Bond Class 3 or Exposure 1 (always includes D veneer) - Bond Class 2		Face A; Inner C; Back A	Face A;Inner D; Back A	Span rating not applicable

Plywood (RATED SHEATHING STRUCTURAL 1)

Archives

Meta

Plywood (RATED SHEATHING STRUCTURAL 1)

Archives

Meta

Technical Wizard

What defines a product under UK and EU construction product regulations?

Tell me more about a Declaration of Performance

The mark of approval stamped on a panel means it can legally be used – but which standards apply?

What is the difference between a touch-sanded panel and sanded panel?

How do APA veneer grades match those in UK and EU standards

I want to specify an APA panel for concrete formwork – what do I need to know?

What plywood panels likely to be available in the UK & EU?

What are the main European standards that I would need to be aware of for plywood panels?

The CE-mark on an APA plywood panel means it conforms to European Standards – but which ones?

How do APA veneer grades match those given in the European standards

I want to specify an APA panel for concrete formwork – what do I need to know?

What are the main plywood panels likely to be available in Europe?

What are the main standards for plywood panels?

What are the main changes to the FSC Chain of Custody Certification standard?

Can US certified EPDs be used for environmental performance ratings under the BREEAM system?

Does APA plywood meet the lowest category (E1) for formaldehyde release without need for further testing?

Can APA plywood and OSB be used in non-construction applications?

What are Use Classes and how do they equate with Service Classes?

How do APA’s member’s products count towards a sustainability assessment for new construction or in refurbishment projects?

What is a ‘life cycle stage’ and how do these link to the environmental assessment of whole buildings?

How do core category rules link with environmental product declarations?

Whose responsibility is it to check that wood products being imported into the EU do not originate from illegally sourced timber supplies?

Does the EUTR require mills to provide any extra documentation for customs entry into the European Union?

Must all plywood and OSB panels carry a CE marking?

What is the definition of a construction product under the CPR?

What is a Declaration of Performance referred to under the Construction Products Regulation?

What is the difference between Structural 1 and Exposure 1?

The CE-mark on an APA plywood panel means it conforms to European Standards – but which ones?

I want to use a Rated Sheathing panel for flooring/ roofing application, what info do I need to know?

What extra strength benefits do Structural 1 OSB panels provide over standard Rated Sheathing panels?

What is the difference between a touch-sanded panel and sanded panel?

How do APA veneer grades match those given in the European standards

How do I correctly gauge the face appearance a plywood Siding panel?

I want to specify an APA panel for concrete formwork – what do I need to know?

Are APA panels tongue and grooved on all four edges?

I am not familiar with the term ‘Sized for Spacing’ – what is its significance?

How are Performance Category and thickness related?

I’d like to know more about a panel’s Span Rating and how it links to thickness.

What is Span Rating on the APA trademark and why is it important?

What is the difference between Exposure 1 and Exterior plywood panels? What are their appropriate uses?

What are the main OSB panels likely to be available in Europe?

What are the main plywood panels likely to be available in Europe?

What are the main European standards that I would need to be aware of for OSB panels?

What are the main European standards that I would need to be aware of for plywood panels?