Panel Veneers (Face B or better, Inner C or C plugged, Back B or better): Thickness Options
| Durability: | Exterior grade (equivalent to (BS) EN 314 Bond Class 3) |
| Veneer/strength grading: | Face B or better, Inner C or C plugged, Back B or better. Class 11 indicates that face veneers are from Group 2 or 3 wood species, suitable for most forming applications |
| Reuse:: | 20 to 50 pours (can reach up to 200 depending on use) |
| Thickness/US Performance Category*: | 15.1mm(19/32*) / 15.9mm(5/8) / 17.5mm(11/16) / 18.3mm(23/32) / 19.1mm(3/4) |
| General Info: | HDO plyform has a hard, opaque resin-fibre overlay, heat-bonded to panel face. Gives a near polished concrete surface. This grade is specified when the concrete finish must be as smooth as possible. While the smooth surface resists abrasion the panel is not for use on both sides |
| Additional Info: | Releasing agent added by mill, with edge sealer usually applied on site |